Author: Richard

Customer created his own opening following my specifications ready for us to install this Woodpecker WP4 Log store stove with a chimney liner

The customer had created his own openings ready for us to install a made to measure riven slate hearth and stoves. The stove in the square opening is a Parkray…

Removal of old, outdated, imposing fireplace to create the opening with a Black riven slate hearth, we then made good plasterwork. We then fitted the Parkray aspect 4 which is…

We removed the existing wooden fireplace to create the opening exposing the original bricks and installed the black limestone slab hearth. We then installed the Parkray aspect 4 which is…

The customer had created his own opening ready for us to install chimney liner on to the stove which was supplied by the customer. Added protection (deflector plates) added on…

We created this opening, exposed the original brickwork and installed a black limestone slab hearth. We then installed a Charnwood arc 5 into the tall opening.

We opened up a boarded up chimney breast to exposes the original brickwork and install a black limestone hearth before we made good the plaster work around the opening. We…

We removed the old wooden fireplace with electric fire and fitted this custom designed stone fireplace with slate hearth. We then installed the Town & Country Rosedale inset.

We were asked to line the chimney with a chimney liner for the existing stove which had not been fitted with one, I advised that it couldn’t be done safely…

Here we removed the existing stove and twin was flue system that the customer no longer used, made good the ceiling ready to decorate and Installed a Gazco electric fireplace…